Warpia SWP100A User's Guide download pdf (Page 11)

Wireless USB A/V Adapter Set User Guide

Page 11

3.1 Connect the PC Adapter to the PC

1. Connect the Wireless USB PC Adapter to a high speed PC USB port. The system will

automatically detect and install the drivers for the connected PC Adapter

2. System Tray icon turns red to indicate that the PC Adapter (Host) is ready to

connect to any paired device in range

3.2 Connect the A/V Adapter

1. Attach the A/V Adapter to the remote display device (TV/Projector/Monitor), and ensure

the PC (with PC Adapter attached) is within 3 meter distance from the A/V Adapter for

the initial connection. Ensure the two adapters have clear line-of-sight. Connect the

provided power supply to the A/V Base power receptacle.

Note: The PC Adapter and Device Adapter in this set are already paired and do not require

performing a pairing procedure. If you should need to perform pairing manually for

any reason (e.g. connecting to a new host PC Adapter, or adding a Device Adapter

that was not purchased in a set), please refer to Appendix B: Pairing Procedure

2. Wait for the System Tray icon to turn green , indicating that a wireless connection

with the A/V Adapter has been established. The Display icon is also displayed as

soon as a connection is established and the Display drivers are active.

Note: If you do not see the icon changing to green, or do not see the Display icon, please

see Appendix A: Troubleshooting Help for suggestions.

3.2.1 Connecting Audio

The following options can be used to connect an Audio Output Device to the A/V Adapter:

Using the HDMI connector. Connect the HDMI cable to the A/V Base. Both video and audio

are delivered on the same HDMI cable. Connect the other end of the cable to the appropriate

HDMI port on the TV/Projector/Monitor.

Using the dedicated 3.5mm port. Connect an audio cable with a 3.5mm (mini-stereo) plug to

the audio jack on the A/V Base. Connect the other end of the cable to the appropriate audio

input jack on the audio device.

Note: The audio output is activated automatically. If you need to set the audio output device

manually, see Setting Audio Output Device.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 36 37

No comments

Warpia SWP100A User's Guide Page 11